Pelletizer is often blocked

(1) the deflection blade wear, uneven distribution of the material, to replace a new deflection scraper; (2) the roller wear, replace the new roller (3) one by one on the roller gets stuck, check the roller; (4) the deflection scraper assembly location error, reassemble deflection scraper; (5) Feed moisture content is too high, reduce the water content.

Pulverizer bearing overheating

(1) the spindle and motor center different heart, adjustment in the one of main shaft; (2) the grease too much, too little or poor, in grease, refueling according to regulations; (3) bearing is damaged, change new bearing; (4) the main shaft bending or rotor imbalance, straightening the spindle, the balance of the rotor; (5) long-term overworked, reduce feed rate; (6) the selected model is wrong, grease to use lithium base molybdenum disulfide.

Extruder forming products

(1) the raw material formula is not appropriate, change the raw material formula; (2) the processing temperature is too high or too low, back) within the cylinder parts; (3) material to enter is not uniform, adjust to the uneven feed; (4) product moisture content is too high or too low, reduce or increase the water or steam; (5) the blade wear, changing the blade; (6) crushing grain size is too big, pulverizer sieve, improving grinding fineness.